What Is The Purpose Of Various Steel Wire Sieve Plates Of Vibrating Screen?

The vibrating screen sieve plate is an important working part of the screening machine to complete the screening process. Each screening machine should choose a sieve plate that meets its working requirements.

Vibrating screen various characteristics of materials, different structures of sieve plates, materials and various parameters of the sieve machine have a certain impact on the screening capacity, efficiency, run out rate and service life of the vibrating screen. Different sieve plates should be selected for different materials and places to achieve the best screening effect.

The sieve plate shall have sufficient strength, high opening rate, and not easy to block holes. When the vibrating screen vibrates, the screen plate will separate materials of different particle sizes through materials of different shapes and sizes under the action of vibration force to achieve classification.

According to the particle size of the material to be screened and the process requirements of screening operation, screen plates can generally be divided into the following categories:

  1. Bar sieve plate

The bar sieve plate is composed of a group of steel bars arranged in parallel with a certain section shape. The bars are arranged in parallel, and the spacing between bars is the mesh size. Bar screen surface is generally used for fixed screen or heavy vibrating screen, and is suitable for screening coarse materials with particle size greater than 50mm.

  1. Perforated sieve plate

Punching sieve plate is generally formed by punching round, square or rectangular sieve holes on a 5-12mm thick steel plate. Compared with the sieve plate with round or square sieve openings, the sieve surface with rectangular sieve openings usually has larger effective area, lighter weight and higher productivity, which is suitable for processing materials with higher moisture content, but the separation accuracy of screening is poor.

  1. Woven mesh sieve plate:

The screen plate of woven mesh is woven with metal wire with bent buckle, and the screen hole is square or rectangular. The utility model has the advantages of light weight and high opening rate; In addition, during the screening process, due to the elasticity of the metal wire, the high frequency vibration will make the fine materials stuck on the steel wire fall off, thus improving the screening efficiency. It is suitable for screening medium and fine materials. But its disadvantage is its short service life.

The screen surface of woven mesh is divided into coarse hole and fine hole. The material for making coarse mesh woven screen mesh is low carbon structural steel.

Wire, spring wire, stainless steel wire, etc. The size of screen hole is generally 4-125mm, and the diameter of steel wire

1.6-12.5mm. The fine hole woven mesh is generally made of low carbon steel, brass, tin, tin surface copper and stainless steel, etc., with a special knitting machine. The opening ratio is 36% – 80%, and the mesh size is:

0.03-16mm。 Applicable screen body angle: 18 ° – 30 °.

  1. Slit sieve plate

The slit screen plate is made of stainless steel as the screen bar, and there are three types of structure: threading type, welding type and braided type. The cross section of the slit sieve plate is round, and the slit width can be 0.25mm, 0.5mm

0.75mm, 1mm, 2mm, etc.

The slotted sieve plate is suitable for dehydration, medium removal and desliming of medium and fine particles.

Get a Quick Quote!

x

    Get a Quick Quote!

    x