What Is The Process Used In The Tsx&Aury Stone Quarry Sieve?

The main function of TSX&AURY stone quarry sieve is to screen sand of different sizes into the same size according to requirements. The main suitable stones are sand-making rocks, pebbles with silt along the river, limestone of different sizes, granite with different hardness, etc. In other cases where there are requirements, the first process is advanced crusher, and then The second step is to enter the circular vibrating screen to screen out fine sand of different sizes, which can be mainly divided into fine sand, medium sand and coarse sand.

If there are specific requirements, such as medium sand, the size of the screen is based on the size of the sieve plate. Hole diameter, different types of sieve plates can be replaced synchronously according to different requirements.

There are four main components of the TSX&AURY stone quarry sieve, the screen box, the screen mesh, the vibration exciter and the damping spring. The position of the vibration exciter is generally placed on the side plate of the quarry screen. As for the operation mode, The main power source of the quarry screen is the motor. The motor and the V-belt run together at the same time, and the vibrator will be driven to continue running.

The installation method of TSX&AURY stone quarry sieve is relatively simple. It mainly adopts seat installation, that is, it is assisted by a bracket. The advantage of using the bracket can not only change the angle and height of the entire stone quarry sieve, but also change the position of the spring support. , adjust the shaker in several ways.

Get a Quick Quote!

x

    Get a Quick Quote!

    x