How To Calculate The TSX Vibrating Screen Mesh Size?

The vibrating screen mesh is used to install on top of the vibrating screen for sieving and grading materials, TSX vibrating screen mesh has polyurethane frame stainless steel screen plate and full polyurethane screen plate, each vibrating screen mesh has its unique use, polyurethane itself has a high modulus of elasticity, high strength to absorb impact, high abrasion resistance, high tensile strength, so it has a high load-bearing capacity, stainless steel screen mesh has The screen holes are regular, corrosion-resistant, and wear-resistant.

The so-called number makes refers to the granularity or coarseness of the material screened, is how many mesh number of materials can pass through the mesh and the number defined in the range of 1 foot * 1 foot. The number of each kind of vibrating screen plate is not the same, mesh is used to evaluate the number of holes on the vibrating screen plate, where the larger the number of holes, the smaller the holes, the smaller the material size. Commonly used sieve cloth mesh (mesh is the number of holes per inch length) is 12 mesh, 16 mesh, 20 mesh, 40 mesh, 60 mesh 80 mesh, etc.

For the vibrating screen mesh size of the screen hole calculation method is as follows.

  1. . mesh size: W = L ÷ n-d, W – average size of mesh (mm), L – adjacent mesh length (mm), d – average diameter of metal wire (mm).
  2. . Screen mesh: 1 inch (25.4mm) length with the number of holes.

1 mesh = 1 aperture + 1 wire diameter mesh / inch = mesh / 25.4mm

  1. 三. Find the number of mesh = 25.4mm ÷ (aperture + wire diameter)
  2. 四.Find the mesh size = 25.4mm ÷ mesh – wire diameter
Scroll to Top

Get a Quick Quote!

x

    Get a Quick Quote!

    x