How Is The TSX’s Vibrating Mine Screen?

The working principle of the TSX vibrating screen is to use the reciprocating vibration generated by the vibrator. TSX Group has a professional design team.

The TSX design team can customize the equipment according to customer requirements. The vibration trajectory of the vibrating screen is a complex spatial curve. Technicians change the activity of materials on the screen surface by adjusting the spatial phase angle of the equipment.

Furthermore, crushed material groups with different particle sizes are uniformly perforated through a single-layer or multi-layer screen surface for multiple times, and are divided into several different levels for screening.

The actual screening process of TSX mining vibrating screen equipment is as follows:

The main results are as follows: 

  1. Materials with different granularity and thickness enter the screen surface through the feeder. By selecting different sieve plates, the exciter vibrates. The material on the screen surface is loosened, expanding the space between the large particles.

Small particles can take advantage of this opportunity at this time and enter the next deck.

  1. Because the screen seams of each deck are designed and calculated. Large particles cannot pass through. Form large and coarse particles on the upper deck, and small particles on the lower deck. obtain the desired end product.
  2. The small material on the screen surface is smaller than the screen gap. Finally, the final product is obtained, the material is separated, and the complete screening process is completed.

It should be noted that when fine particles pass through the screen, although the particles are smaller than the pores of the screen, the difficulty of passing through the screen is different.

For materials that are similar in size to the screen size, it is almost impossible to pass through the screen slots.

Get a Quick Quote!

x

    Get a Quick Quote!

    x